Set up your tripod (3.8 meter / 12 feet)



This article shows you a quick guide on how to easily set up your 3.8 meter tripod.


Follow these easy-to-follow instructions to prepare your tripod.


1. You can find the lower part of a quick-release plate in the box. Fasten it to the tripod - you can leave it there from now on.



2. Unlock the release plate by pushing the golden metallic lever up. Now push the grey plastic lever up as well.



3. Attach the Veo Cam to the release plate. The grey lever will click and go back to the closed position.



4. Now, push the golden metallic lever back to lock it. You are ready to record!



5. Turn your Veo Cam on and connect to it, but do not start the recording yet. Now raise the tripod to the maximum height, and confirm it is aligned with the centerline. Make sure you see all corners on the preview and adjust the tripod if necessary for better alignment with the centerline. 

You are ready to start your recording now!


In this video, you can see a demonstration of how to set up your 3.8 meter / 12 feet tripod:


Was this article helpful?

Articles in this section