Veo Cam 3 indicator lights.

Understand what your Veo Cam 3 is up to by looking at the LEDs in the back of the camera. This guide will help you understand what the different light patterns mean.

 

You will find the indicator lights in the back of the camera.

The first two lights will tell you the state of the camera or the action it is performing, and the other three will tell you the status of the battery.

Backside final.jpg

 

Camera status

Booting: The camera is turning on/off. Wait until the LEDs are solid, then the camera is ready.

Booting.gif


Ready for input: The camera is ready. Open the Veo Camera app to live-stream or record.

Ready_for_input.png


Busy: The camera is recording, live-streaming, uploading, or updating.

Busy.gif


Error: The camera didn't boot properly, and it's experiencing an error. Please restart your Veo Cam 2 by pressing the power button for 15 seconds.

Errors.gif

 

Battery status

Check out the table below for a quick glimpse of the battery levels shown by the last three camera lights. This nifty guide will keep you in the loop about your battery usage, ensuring you steer clear of any surprise shutdowns.

Three solid lights 67-100% battery level
Two solid lights 33 - 67% battery level
One solid light 8 - 33% battery level
One light blinking fast 0 - 8% battery level
Three solid lights 97-100% Charging
Two solid lights, one light pulsing 67 - 97 % Charging
One solid light, one light pulsing 33 - 67 % Charging
One light pulsing 0 - 33 % Charging
Was this article helpful?

Articles in this section